Asus ESC1000 G2 Instrukcja Użytkownika Strona 71

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 194
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 70
ASUS ESC1000 G2 3-23
3. Marvell
®
Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_E1/E2 [navy blue])
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
For high performance of ASUS SSD Caching, please connect one HDD and one SSD
to Marvell
®
SATA6G_E1/E2 connectors.
For regular usage, the SATA6G_E1/E2 connectors are recommended for data drivers.
You must install Windows
®
XP Service Pack 3 or later versions before using Serial ATA
hard disk drives.
When using NCQ, set the Marvell Storage Controller item in the BIOS to [Enabled].
Refer to section 4.5.7OnboardDevicesConguration for details.
Press <Ctrl> + <M> during POST to enter the Marvell RAID utility to create or delete a
RAID conguration.
If you want to install a Windows operating system to a RAID conguration created using
the Marvell SATA controller, you have to create a RAID driver disk using the motherboard
support DVD and load the driver during OS installation. For 32/64bit Windows XP OS,
load rst the Marvell shared library driver, and then load Marvell 91xx SATA Controller
Driver. For Windows Vista / Windows 7 OS, load only the Marvell 91xx SATA Controller
Driver.
®
Przeglądanie stron 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 193 194

Komentarze do niniejszej Instrukcji

Brak uwag