Asus LSI SAS3442X-R Instrukcja Użytkownika Pobierz pdf (Strona 60)

A-12 Using the CFGGEN IR Conﬁguration Utility

2. CFGGEN does not allow adding a hot spare disk of a type

(SAS/SATA) that is different from the disk types in any of the

volumes.

Command Line –

cfggen <controller #> hotspare <SCSI ID>

cfggen <controller #> hotspare bay <enclosure:bay>

Parameters –

• <controller #> – Number of the SAS controller targeted by this

command.

• Bay – This option indicates that enclosure:bay values are speciﬁed

instead of SCSI ID values.

• <SCSI ID> – SCSI ID of the drive targeted by this command.

• <enclosure:bay> – The enclosure:bay value for the disk drive to use

for the new hot spare disk. These values can be obtained via the

output of the DISPLAY command.

Program Return Value –

0x00 SUCCESS: command completed successfully.

0x01 FAILURE: bad command line arguments or operational failure.

A.3.7 STATUS Command

The STATUS command displays the status of any volume

synchronization operation that is currently in progress on the controller.

If no such operation is in progress, CFGGEN displays a message

indicating this before it exits. The STATUS command adds the ﬂag

Inactive to the Volume State ﬁeld, if the controller ﬁrmware marks the

volume as Inactive.

Command Line –

cfggen <controller #> status

Parameters –

• <controller #> – Number of the SAS controller targeted by this

command.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 66 67 68

Brak uwag

Asus LSI SAS3442X-R Instrukcja Użytkownika Strona 60